Construction ID:
Floor Finishes: Adhered Tile, Timber, Vinyl, Synthetics
Construction Height:
31¹
mm
Mass:
23¹
kg / m²
Thermal Resistance (R-value):
0.51
m² K / W
Uniform Distributed Load (UDL):
3.0
kN / m²
Point Load (≥ 20 cm²):
2.0
kN
Impact Sound Reduction:
–
dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 12°C and at most 30°C.
- Firmax CP Product Format: 1200 x 600 x 12 mm (2 layers of 6 mm).
- Firmax CP Product Mass: 21 kg / m².
- Firmax CP Product Thermal Resistance: 0.038 m² K / W.
Floor Finishes:
Adhered Tile, Timber, Vinyl, Synthetics
Construction Height:
31¹ mm
Mass:
23¹ kg / m²
Thermal Resistance (R-value):
0.51 m² K / W
Uniform Distributed Load (UDL):
3.0 kN / m²
Point Load (≥ 20 cm²):
– kN
Impact Sound Reduction:
– dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 12°C and at most 30°C.
- Firmax CP Product Format: 1200 x 600 x 12 mm (2 layers of 6 mm).
- Firmax CP Product Mass: 21 kg / m².
- Firmax CP Product Thermal Resistance: 0.038 m² K / W.
