Construction ID:
Floor Finishes: Solid Timber
Construction Height:
41¹
mm
Mass:
2¹
kg / m²
Thermal Resistance (R-value):
0.55
m² K / W
Uniform Distributed Load (UDL):
3.0
kN / m²
Point Load (≥ 20 cm²):
2.0
kN
Impact Sound Reduction:
–
dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
Floor Finishes:
Solid Timber
Construction Height:
41¹ mm
Mass:
2¹ kg / m²
Thermal Resistance (R-value):
0.55 m² K / W
Uniform Distributed Load (UDL):
3.0 kN / m²
Point Load (≥ 20 cm²):
– kN
Impact Sound Reduction:
– dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
