[neo19-50]
Construction ID:
Floor Finishes: Tiles, Stone
Construction Height:
22¹
mm
Mass:
7¹
kg / m²
Thermal Resistance (R-value):
0.51
m² K / W
Uniform Distributed Load (UDL):
2.0
kN / m²
Point Load (≥ 20 cm²):
1.0
kN
Impact Sound Reduction:
–
dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 5°C.
- Maximum tile and stone sizes are material and substrate dependent, please contact JUPITER for advice
- DimaMat Roll Format: 1000 x 2000 x 1.2 mm.
Floor Finishes:
Tiles, Stone
Construction Height:
22¹ mm
Mass:
7¹ kg / m²
Thermal Resistance (R-value):
0.51 m² K / W
Uniform Distributed Load (UDL):
2.0 kN / m²
Point Load (≥ 20 cm²):
– kN
Impact Sound Reduction:
– dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 5°C.
- Maximum tile and stone sizes are material and substrate dependent, please contact JUPITER for advice
- DimaMat Roll Format: 1000 x 2000 x 1.2 mm.
