Construction ID:
Floor Finishes: Carpet, Tile, Timber, Laminates, Synthetics
Construction Height:
37¹
mm
Mass:
38¹
kg / m²
Thermal Resistance (R-value):
0.51
m² K / W
Uniform Distributed Load (UDL):
5.0
kN / m²
Point Load (≥ 20 cm²):
5.0
kN
Impact Sound Reduction:
–
dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 5°C and at most 30°C.
- SRT Product Format: 600 mm x 250 mm x 18 mm.
- SRT Product Mass: 35 kg / m².
Floor Finishes:
Carpet, Tile, Timber, Laminates, Synthetics
Construction Height:
37¹ mm
Mass:
38¹ kg / m²
Thermal Resistance (R-value):
0.51 m² K / W
Uniform Distributed Load (UDL):
5.0 kN / m²
Point Load (≥ 20 cm²):
– kN
Impact Sound Reduction:
– dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 5°C and at most 30°C.
- SRT Product Format: 600 mm x 250 mm x 18 mm.
- SRT Product Mass: 35 kg / m².
