Construction ID:
Floor Finishes: Carpet, Tile, Timber, Laminates, Synthetics
Construction Height:
54¹
mm
Mass:
~25¹
kg / m²
Thermal Resistance (R-value):
0.51
m² K / W
Uniform Distributed Load (UDL):
2.0
kN / m²
Point Load (≥ 20 cm²):
1.5
kN
Impact Sound Reduction:
–
dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Curing Time for Light Foot Traffic: 1-2 days.
- Drying Time at 20°C and 65% Relative Humidity: 1 day / mm up to 40 mm, then 2 days / mm thereafter.
- Dry Density: 1950 – 2050 kg / m³.
Floor Finishes:
Carpet, Tile, Timber, Laminates, Synthetics
Construction Height:
54¹ mm
Mass:
~25¹ kg / m²
Thermal Resistance (R-value):
0.51 m² K / W
Uniform Distributed Load (UDL):
2.0 kN / m²
Point Load (≥ 20 cm²):
– kN
Impact Sound Reduction:
– dB
¹ Excludes floor finish.
Area of Application:
- For refurbishment areas with restricted ceiling heights where minimum insulation requirements are not required.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Curing Time for Light Foot Traffic: 1-2 days.
- Drying Time at 20°C and 65% Relative Humidity: 1 day / mm up to 40 mm, then 2 days / mm thereafter.
- Dry Density: 1950 – 2050 kg / m³.
