Construction ID:
Construction Height:
mm
Mass:
kg / m²
Thermal Resistance (R-value):
m² K / W
Uniform Distributed Load (UDL):
kN / m²
Point Load (≥ 20 cm²):
kN
Impact Sound Reduction:
dB
¹ Construction height based on Fermacell thickness.
² Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
³ R-value of Jupiter Ideal system only, Part L compliant with the correct amount of additional insulation.
⁴ Dependent on joist integrity.
Area of Application:
- Ground floors or floors located above unheated or uninsulated rooms such as garages and basements.
- For upper floor installations refer instead to Construction ID: EPS-BJ3U.
Additional Information:
- When installed, the Fermacell elements may follow any undulation that occurs from the joists. This may need to be taken out with the use of a thin levelling compound.
- Aluminium diffuser plates should be flush with the top of the joists.
Floor Finishes:
Construction Height:
Mass:
Thermal Resistance (R-value):
Uniform Distributed Load (UDL):
Point Load (≥ 20 cm²):
Impact Sound Reduction:
¹ Construction height based on Fermacell thickness.
² Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
³ R-value of Jupiter Ideal system only, Part L compliant with the correct amount of additional insulation.
⁴ Dependent on joist integrity.
Area of Application:
- Ground floors or floors located above unheated or uninsulated rooms such as garages and basements.
- For upper floor installations refer instead to Construction ID: EPS-BJ3U.
Additional Information:
- When installed, the Fermacell elements may follow any undulation that occurs from the joists. This may need to be taken out with the use of a thin levelling compound.
- Aluminium diffuser plates should be flush with the top of the joists.
