Skip to content

Construction ID:

Floor Finishes: Solid Timber

Construction Height:

 98 – 148¹

mm

Mass:

 18 – 20¹

kg / m²

Thermal Resistance (R-value):

 0.86²

m² K / W

Uniform Distributed Load (UDL):

 3.0³

kN / m²

Point Load (≥ 20 cm²):

 2.0³

kN

Impact Sound Reduction:

dB

¹ Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
² R-value of JUPITER Ideal system only.
³ Tested with Kingspan Kooltherm K103 ≤ 100 mm.

Area of Application:

  • Ground floors or floors located above unheated rooms such as garages and basements.
  • For upper floor installations refer instead to Construction ID: EPS-60U.

Additional Information:

  • Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).

Floor Finishes:

Solid Timber

Construction Height:

 98 – 148¹ mm

Mass:

 18 – 20¹ kg / m²

Thermal Resistance (R-value):

 0.86² m² K / W

Uniform Distributed Load (UDL):

 3.0³ kN / m²

Point Load (≥ 20 cm²):

– kN

Impact Sound Reduction:

– dB

¹ Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
² R-value of JUPITER Ideal system only.
³ Tested with Kingspan Kooltherm K103 ≤ 100 mm.

Area of Application:

  • Ground floors or floors located above unheated rooms such as garages and basements.
  • For upper floor installations refer instead to Construction ID: EPS-60U.

Additional Information:

  • Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).