Construction ID:
Floor Finishes: Carpet, tiles, timber, laminates, synthetics.
Construction Height:
48¹
mm
Mass:
38¹
kg / m²
Thermal Resistance (R-value):
0.86²
m² K / W
Uniform Distributed Load (UDL):
5.0
kN / m²
Point Load (≥ 20 cm²):
5.0
kN
Impact Sound Reduction:
<14³
dB
¹ Excludes floor finish.
² Part L compliant for floors above heated rooms.
³ Valid on concrete floors >120 mm (DIN EN 4109: > 276 kg / m²).
Area of Application:
- Floors with rooms of equal temperature above and below, and a minimum R-value of 0.75 m² K / W.
- This construction is suitable for use on intermediate floors, and no further insulation is needed to meet the requirements of Approved Document L.
- For ground floor installations refer to Construction ID: EPS-40G.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 5°C.
- Screed Replacement Tile Product Format: 600 x 250 x 18 mm.
- Screed Replacement Tile Product Mass: 35 kg / m².
Floor Finishes:
Carpet, tiles, timber, laminates, synthetics.
Construction Height:
48¹ mm
Mass:
38¹ kg / m²
Thermal Resistance (R-value):
0.86² m² K / W
Uniform Distributed Load (UDL):
5.0 kN / m²
Point Load (≥ 20 cm²):
<14³ kN
Impact Sound Reduction:
<14³ dB
¹ Excludes floor finish.
² Part L compliant for floors above heated rooms.
³ Valid on concrete floors >120 mm (DIN EN 4109: > 276 kg / m²).
Area of Application:
- Floors with rooms of equal temperature above and below, and a minimum R-value of 0.75 m² K / W.
- This construction is suitable for use on intermediate floors, and no further insulation is needed to meet the requirements of Approved Document L.
- For ground floor installations refer to Construction ID: EPS-40G.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 5°C.
- Screed Replacement Tile Product Format: 600 x 250 x 18 mm.
- Screed Replacement Tile Product Mass: 35 kg / m².
