Construction ID:
Floor Finishes: Engineered Timber
Construction Height:
98 – 148¹
mm
Mass:
15 – 17¹
kg / m²
Thermal Resistance (R-value):
3.379²
m² K / W
Uniform Distributed Load (UDL):
1.5³
kN / m²
Point Load (≥ 20 cm²):
1.0³
kN
Impact Sound Reduction:
–
dB
¹ Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
² R-value of JUPITER Ideal system only.
³ Tested with Kingspan Kooltherm K103 ≤ 100 mm.
Area of Application:
- Ground floors or floors located above unheated rooms such as garages and basements.
- For upper floor installations refer instead to Construction ID: EPS-20U.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
Floor Finishes:
Engineered Timber
Construction Height:
98 – 148¹ mm
Mass:
15 – 17¹ kg / m²
Thermal Resistance (R-value):
3.379² m² K / W
Uniform Distributed Load (UDL):
1.5³ kN / m²
Point Load (≥ 20 cm²):
– kN
Impact Sound Reduction:
– dB
¹ Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
² R-value of JUPITER Ideal system only.
³ Tested with Kingspan Kooltherm K103 ≤ 100 mm.
Area of Application:
- Ground floors or floors located above unheated rooms such as garages and basements.
- For upper floor installations refer instead to Construction ID: EPS-20U.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
