Construction ID:
Floor Finishes: Carpet, Tile, Timber, Laminates, Synthetics
Construction Height:
100 – 150¹
mm
Mass:
27 – 29¹
kg / m²
Thermal Resistance (R-value):
0.86²
m² K / W
Uniform Distributed Load (UDL):
2.0³
kN / m²
Point Load (≥ 20 cm²):
2.0³
kN
Impact Sound Reduction:
–
dB
¹ Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
² R-value of JUPITER Ideal system only.
³ Tested with Kingspan Kooltherm K103 ≤ 100 mm.
Area of Application:
- Ground floors or floors located above unheated rooms such as garages and basements.
- For upper floor installations refer instead to Construction ID: EPS-10U.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 10°C and at most 40°C.
- Fermacell product format: 1500 x 500 x 20 mm.
- Caution: restrictions apply to maximum tile and stone sizes on Fermacell.
Floor Finishes:
Carpet, Tile, Timber, Laminates, Synthetics
Construction Height:
100 – 150¹ mm
Mass:
27 – 29¹ kg / m²
Thermal Resistance (R-value):
0.86² m² K / W
Uniform Distributed Load (UDL):
2.0³ kN / m²
Point Load (≥ 20 cm²):
– kN
Impact Sound Reduction:
– dB
¹ Based on 50 mm and 100 mm Kingspan Kooltherm K103, excludes floor finish.
² R-value of JUPITER Ideal system only.
³ Tested with Kingspan Kooltherm K103 ≤ 100 mm.
Area of Application:
- Ground floors or floors located above unheated rooms such as garages and basements.
- For upper floor installations refer instead to Construction ID: EPS-10U.
Additional Information:
- Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).
- Installation environment must be at least 10°C and at most 40°C.
- Fermacell product format: 1500 x 500 x 20 mm.
- Caution: restrictions apply to maximum tile and stone sizes on Fermacell.
