Construction ID:
Floor Finishes: All Floor Finishes (Caution with Tiles and Stone)
Construction Height:
42¹
mm
Mass:
29¹
kg / m²
Thermal Resistance (R-value):
0.75²
m² K / W
Uniform Distributed Load (UDL):
4.0
kN / m²
Point Load (≥ 20 cm²):
4.0
kN
Impact Sound Reduction:
Part E Compliant
dB
¹ Excludes floor finish.
² Excludes R-value of mineral wool, Part L compliant for floors above heated rooms.
Area of Application:
- Floors with rooms of equal temperature above and below, and a minimum R-value of 0.75 m² K / W.
- This construction is suitable for use on intermediate floors, no further insulation is needed to meet the Part L requirements.
Additional Information:
- Airborne Sound: 56 dB (≥ 45 dB required).
- Impact Sound: 48 dB (≤ 62 dB required),
- Full acoustic report available.
- Ceiling must be suspended e.g. typical metal frame system.
Floor Finishes:
All Floor Finishes (Caution with Tiles and Stone)
Construction Height:
42¹ mm
Mass:
29¹ kg / m²
Thermal Resistance (R-value):
0.75² m² K / W
Uniform Distributed Load (UDL):
4.0 kN / m²
Point Load (≥ 20 cm²):
Part E Compliant kN
Impact Sound Reduction:
Part E Compliant dB
¹ Excludes floor finish.
² Excludes R-value of mineral wool, Part L compliant for floors above heated rooms.
Area of Application:
- Floors with rooms of equal temperature above and below, and a minimum R-value of 0.75 m² K / W.
- This construction is suitable for use on intermediate floors, no further insulation is needed to meet the Part L requirements.
Additional Information:
- Airborne Sound: 56 dB (≥ 45 dB required).
- Impact Sound: 48 dB (≤ 62 dB required),
- Full acoustic report available.
- Ceiling must be suspended e.g. typical metal frame system.
