Skip to content

Construction ID:

Floor Finishes: Solid timber.

Construction Height:

 ≤52¹

mm

Mass:

 8¹

kg / m²

Thermal Resistance (R-value):

 0.75²

m² K / W

Uniform Distributed Load (UDL):

3.0

kN / m²

Point Load (≥ 20 cm²):

2.5

kN

Impact Sound Reduction:

≤21³

dB

¹ Excludes floor finish.
² Part L compliant for floors above heated rooms.
³ Valid on concrete floors > 12 cm (DIN EN 4109: > 276 kg / m²).

Area of Application:

  • Floors with rooms of equal temperature above and below, and a minimum R-value of 0.75 m² K / W.
  • This construction is suitable for use on intermediate floors, and no further insulation is needed to meet the requirements of Approved Document L.
  • For ground floor installations refer to Construction ID: ECO-60G.

Additional Information:

  • Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).

Floor Finishes:

Solid timber.

Construction Height:

 ≤52¹ mm

Mass:

 8¹ kg / m²

Thermal Resistance (R-value):

 0.75² m² K / W

Uniform Distributed Load (UDL):

3.0 kN / m²

Point Load (≥ 20 cm²):

≤21³ kN

Impact Sound Reduction:

≤21³ dB

¹ Excludes floor finish.
² Part L compliant for floors above heated rooms.
³ Valid on concrete floors > 12 cm (DIN EN 4109: > 276 kg / m²).

Area of Application:

  • Floors with rooms of equal temperature above and below, and a minimum R-value of 0.75 m² K / W.
  • This construction is suitable for use on intermediate floors, and no further insulation is needed to meet the requirements of Approved Document L.
  • For ground floor installations refer to Construction ID: ECO-60G.

Additional Information:

  • Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1 (± 3 mm over 2 m).