Our systems

System IDEAL EPS

The JUPITER IDEAL underfloor heating system is a 'dry installed' panel based system consisting of 30mm thick EPS 035 polystyrene elements with integral aluminium heat diffusion plates. Dry installed means that no screed is required which in turn leads to faster installation and quicker heating up times.

There are two types of panel, Central Zone (CZ) panels with 2 pipes and Edge Zone (EZ) panels with 4 pipes. CZ panels are used in main living areas and EZ panels are used near large areas of glazing, bathrooms or simply when higher heat output is required. The 'pre-scored' panels are 1000 mm x 500 mm and can be 'snapped' to fit on site.

Watch our simple video installation guide


Installation

The IDEAL System comprises of polystyrene panels with pre-tracked channels to house the JUPITER pipe. Each 1000 x 500 x 30 mm panel is pre-scored and can be snapped into smaller sections to fit on site.

The IDEAL System comprises of polystyrene panels with pre-tracked channels to house the JUPITER pipe. Each 1000 x 500 x 30 mm panel is pre-scored and can be snapped into smaller sections to fit on site.

Solid or engineered timber floors can be laid directly either as a floating floor or nailed to floating battens.

Other floor finishes such as stone, tile or carpets should be installed on a suitable load bearing surface such as Fermacell flooring elements or Screed Replacement Tiles. Unlike other manufacturers we do not recommend chipboard as a load bearing surface.


Are you looking to specify or install one of our systems?

If you can’t find what you’re looking for please call us...